Description
Item specifics
| Condition: | New | Other Part Number: | 10006 |
| Brand: | DAVIS SPEED EQUIPMENT | Part Brand: | DAVIS SPEED EQUIPMENT |
| Warranty: | Yes | Surface Finish: | PLAIN STEEL |
| Country/Region of Manufacture: | United States | Manufacturer Part Number: | 10006 |
| UPC: | Does not apply |
NEW POWER STEERING & ALTERNATOR COMBO BRACKET SET FOR THE 1963-74 292
USING A SAGINAW PUMP AND 10SI DELCO ALTERNATOR.
BRACKETS ARE PLAIN STEEL AND ARE “READY TO PAINT”. JUST WIPE DOWN WITH SOLVENT AND PAINT.
BRACKETS COME WITH HARDWARE & INSTRUCTIONS. DOES NOT INCLUDE PUMP, ALTERNATOR, BELTS OR PULLEYS.
REQUIREMENTS:
1) 292 USING THE 1963-64 OR 1965-74 STYLE WATER PUMP.
2) GM SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES BELOW.
3) GM 10SI CASED ALTERNATOR.
4) NON-INTEGRAL CYLINDER HEAD.
5) 2 GROOVE POWER STEERING PUMP PULLEY.
WHAT THIS DOES NOT WORK WITH:
1) NOT FOR USE WITH INTEGRAL CYLINDER HEADS.
2) NOT FOR USE WITH TRIPOWER.
3) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, CHECK DIMENSIONAL DRAWING FOR CLEARANCES.
YOU MAY FIND 10021 WILL FIT BETTER.
NOTES OF INTEREST:
1) WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.
2) IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER, THEN YOU CAN ALSO RUN AIR CONDITIONING. WE HAVE THREE OPTIONS FOR A/C.
3) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.
ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.
Design is the property of Davis Speed Equipment, LLC
