10020 POWER STEERING & ALTERNATOR BRACKET TIGHT FIT DESIGN 292 USING 1963-74 WATER PUMP

$199.00

TIGHT FIT POWER STEERING & ALTERNATOR BRACKET FOR 292 USING 1963-74 WATER PUMPS. WORKS WITH NON-INTEGRAL HEADS & BALANCER WITH WIDE SPACE AT REAR ONLY. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS.

Category:

Description

Item specifics

Condition: New Other Part Number: 10020
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10020
UPC: Does not apply

COMBINATION ALTERNATOR & POWER STEERING BRACKETS SPECIFICALLY FOR USE WHEN INSTALLING A 292 THAT
IS USING THE 1963-64 OR 1965-74 VINTAGE WATER PUMP INTO A 1948 OR OLDER CHEVY CAR, OR A 1955 FIRST SERIES OR OLDER GM TRUCK.
IF THAT IS NOT WHAT YOU ARE USING THE ENGINE IN, THEN SEE LISTING 10006.

IF YOU ARE USING A 1975-89 VINTAGE 292 WATER PUMP, THEN PLEASE SEE LISTING 10021 INSTEAD.

BRACKETS ARE TIG WELDED PLAIN STEEL AND ARE READY TO PAINT. JUST WIPE DOWN WITH SOLVENT AND PAINT.

INCLUDES ALL HARDWARE AND INSTRUCTIONS.

REQUIREMENTS:

1) 292 WITH 1963-64 OR 1965-74 STYLE WATER PUMP.
2) NON-INTEGRATED CYLINDER HEAD.
3) 2 GROOVE PULLEY ON POWER STEERING PUMP.
4) GM SAGINAW TYPE 1 POWER STEERING PUMP. (SEE NOTES).
5) GM 10SI TYPE ALTERNATOR.
6) STRAIGHT UP OR ADJUSTABLE SIDE CONNECTION WATER NECK (SEE SBC).
7) BALANCER MUST HAVE THE WIDE METAL BAND AT THE BACK (AS SHOWN IN PICS).

WHAT THIS IN NOT FOR:

1) ANYTHING OTHER THAN A 292.
2) DOES NOT WORK WITH THE INTEGRATED CYLINDER HEAD.
3) DOES NO WORK WITH TRIPOWER INTAKE (3X1).
4) DOES NOT WORK WITH ADAPTED 235 VALVE COVER.
5) NOT INTENDED FOR VEHICLES THAT ORIGINALLY HAD THESE ENGINES IN THEM DUE TO THE UPPER RADIATOR
HOSE ROUTING.
6) NOT TO BE USED WITH ANY OTHER WATER PUMP TYPE.

NOTES OF INTEREST: 

1) WORKS WITH ALL STOCK & AFTERMARKET EXHAUST MANIFOLDS AND HEADERS.
2) WORKS WITH ALL INTAKES EXCEPT 3X1.
3) WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.
4) IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND ALSO WANT AC, THEN SEE 10038.
5) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

Design is the property of Davis Speed Equipment, LLC

Additional information

Weight 8 lbs
Dimensions 12 x 12 x 9 in