10021 POWER STEERING & ALTERNATOR BRACKET TIGHT FIT DESIGN 292 USING 1975-89 WATER PUMP

$199.00

TIGHT FIT POWER STEERING & ALTERNATOR BRACKET FOR 292 USING 1975-89 WATER PUMPS. WORKS WITH NON-INTEGRAL HEADS. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS. CAN ALSO BE USED ON 153-250 ENGINES.

4 in stock

Description

Item specifics

Condition: New Other Part Number: 10021
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10021
UPC: Does not apply

THIS IS A COMBINATION ALTERNATOR & POWER STEERING BRACKET SPECIFICALLY DESIGNED FOR WHEN PUTTING A 292 WITH
EITHER A 1975-79 OR 1980-89 WATER PUMP INTO A 1948 OR OLDER CHEVY CAR, OR A 1955 FIRST SERIES OR OLDER GM TRUCK.
IF THAT IS NOT WHAT YOU ARE INSTALLING YOUR ENGINE INTO, THEN PLEASE SEE 10007 INSTEAD.

BRACKETS ARE TIG WELDED PLAIN STEEL AND COME READY TO PAINT. JUST WIPE DOWN WITH SOLVENT AND PAINT.

INCLUDES HARDWARE AND INSTRUCTIONS.

DOES NOT INCLUDE ALTERNATOR, PUMP, BELTS OR PULLEYS.

HAS ADJUSTMENT AVAILABLE FRONT TO BACK TO HANDLE DIFFERENT BELTING COMBINATIONS.

REQUIREMENTS:

1) 292 ENGINE USING THE 1975-77 OR 1978-89 STYLE WATER PUMP.
2) GM 10SI STYLE ALTERNATOR.
3) GM SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES.
4) 2 GROOVE PULLEY ON POWER STEERING PUMP.
5) NON-INTEGRAL CYLINDER HEAD.
6) STRAIGHT UP OR ADJUSTABLE SIDE CONNECTION WATER NECK (FROM SBC).

WHAT THIS DOES NOT WORK WITH:

1) NOT FOR 292 ENGINES USING 1963-64 OR 1965-74 STYLE WATER PUMPS. SEE 10020 INSTEAD.
2) DOES NOT WORK WITH INTEGRAL CYLINDER HEAD.
3) NOT INTENDED FOR VEHICLES THAT ORIGINALLY HAD THESE ENGINES IN THEM DUE TO THE UPPER RADIATOR
HOSE ROUTING AND HOW HIGH THE ALTERNATOR SITS MAY INTERFERE WITH HOOD CLEARANCES ON NEWER CARS.

NOTES OF INTEREST: 

1) CAN BE USED ON 153 194 215 230 250 ENGINES.
1) CAN BE USED ON A 292 THAT IS USING A WATER PUMP & THERMOSTAT HOUSING FROM A 153-250.
2) WORKS WITH ALL STOCK & AFTERMARKET EXHAUST MANIFOLDS AND HEADERS.
3) WORKS WITH ALL INTAKES EXCEPT 3X1.
4) WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.
5) IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND ALSO WANT AC, THEN SEE 10039.
6) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.
7) WORKS WITH ADAPTED 235 VALVE COVER.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

Design is the property of Davis Speed Equipment, LLC

Additional information

Weight 8 lbs
Dimensions 11 x 8.5 x 5.5 in