Description
Item specifics
| Condition: | New | Manufacturer Part Number: | 10045 |
| Surface Finish: | PLAIN STEEL | Part Brand: | Davis Speed Equipment |
| Warranty: | Yes | Country of Manufacture: | United States |
| Country/Region of Manufacture: | United States |
BE SURE TO READ & UNDERSTAND THE ENTIRE LISTING PRIOR TO PURCHASE!
MAKE SURE YOU HAVE VERIFIED THE YEAR OF YOUR ENGINE BLOCK BEFORE PURCHASE!!
AIR CONDITIONING POWER STEERING & ALTERNATOR BRACKET SET FOR A 1955-62 235 OR 261 ENGINE USING AN
ADAPTED 1954 3/8″ BELT GROOVE WATER PUMP. 10045 INCLUDES BRACKETS, 2 GROOVE BALANCER, WATER PUMP ADAPTER PLATE,
3 FAN BELTS, 2 GROOVE CHROME STEEL POWER STEERING PULLEY, HARDWARE & INSTRUCTIONS.
BRACKETS ARE PLAIN STEEL AND ARE READY TO PAINT. JUST CLEAN WITH SOLVENT AND PAINT.
FOR 1955 FIRST SERIES TRUCK ENGINES SEE 10044 INSTEAD.
THIS SETUP INCLUDES THE FOLLOWING:
BRACKET SET 10024
2 GROOVE BALANCER
2 GROOVE CHROME STEEL POWER STEERING PULLEY
3 FAN BELTS
WATER PUMP ADAPTER PLATE
REQUIREMENTS TO USE BRACKETS:
1) 1955-62 ENGINE BLOCK. SEE PICS.
2) ADAPTED 1954 TYPE WATER PUMP WITH 3/8″ BELT GROOVE.
3) 2 GROOVE BALANCER & PS PUMP PULLEY.
4) SANDEN 508 (SD5) TYPE AC COMPRESSOR. OTHERS MAY WORK. COMPARE CASE DIMENSIONS.
5) SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES & PICS.
6) 10SI CASED ALTERNATOR.
DOES NOT WORK WITH:
1) EARLIER ENGINE BLOCKS WITH THE GENERATOR BOLTS ON THE OIL PAN RAIL. SEE 10044 INSTEAD.
2) 1955 FIRST SERIES TRUCK ENGINES. SEE 10044 INSTEAD.
3) 3X1 INTAKES.
NOTES:
1) WORKS WITH ALL EXHAUST MANIFOLDS & HEADERS.
2) IF YOU ARE NOT ADAPTING A 1954 WATER PUMP, THEN SEE 10036 INSTEAD.
3) WORKS WITH ALL INTAKES EXCEPT 3X1.
4) WORKS WITH FRONT CORNER MOTOR MOUNTS LIKE 1955-57 CARS HAD.
5) WORKS WITH OUR FRONT CORNER MOTOR MOUNTS PART 10046.
6) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
STUDS ARE REMOVABLE!! KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6 CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.
ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA!
Design is the property of Davis Speed Equipment, LLC
