10048 SIDE MOTOR MOUNTS FOR 1962-89 194 215 230 250 292 CHEVY ENGINE INTO 1941-54 CAR

$149.00

SIDE MOTOR MOUNTS FOR INSTALLING A 1962-89 VINTAGE CHEVY 194-292 ENGINE INTO A 1949-54 CHEVY CAR. MAY BE USED IN OTHERS AS WELL.

2 in stock

Description

Item specifics

Condition: New Manufacturer Part Number: 10048
Surface Finish: PLAIN STEEL Part Brand: Davis Speed Equipment
Warranty: Yes Country of Manufacture: United States
Country/Region of Manufacture: United States

THESE MOUNTS ARE INTENDED FOR MOUNTING A 1962-89 VINTAGE 194, 230, 215, 250 or 292
INTO A 1941-54 CHEVY CAR. MAY WORK IN OTHER APPLICATIONS. PLEASE READ THE ENTIRE LISTING.

THESE ARE TECHNICALLY INTENDED FOR A 1949-54 CAR. IF YOU ARE GOING TO USE THEM ON A 1948 OR OLDER CAR,
THEN TELL US WHEN ORDERING SO WE CAN SEND YOU THE CORRECT LONGER FRAME MOUNTS.

OFFSET MOUNT IS FOR THE DRIVERS SIDE TO CLEAR THE STEERING
CLEARS STOCK STEERING ON A 1949-54 CAR.
CLEARS STOCK EMERGENCY BRAKE.
CLEARS SANDEN 508 A/C COMPRESSOR.
WORKS WITH ALL OF OUR A/C, P/S AND ALTERNATOR BRACKETS.
WORKS WITH CAST IRON HEADERS.
WORKS WITH TUBE STEEL HEADERS.
AND YES, IT INCLUDES THE RUBBER MOUNT…

REQUIRES WELDING OF FRAME BRACKET TO CAR FRAME.

BASICALLY, IF YOU HAVE A 4 SIDED FRAME RAIL, A 22″-24″ INSIDE FRAME DIMENSION,
AND THE OIL PAN RAIL IS APPROXIMATELY LEVEL WITH THE TOP OF THE FRAME RAIL, GIVE OR TAKE 1/2″,
THEN THESE SHOULD WORK FOR YOU.

IF THE OIL PAN RAIL IS LOWER THAN THE TOP OF THE FRAME, THEN REMOVING THE SPACERS OR TRIMMING
THE FRAME BRACKET SO IT FITS INSIDE THE FRAME RAIL MAY BE NECESSARY (1948 & OLDER APPLICATIONS).

AS WITH ALL OUR MOTOR MOUNTS, OUR RUBBER MOUNTS ARE A HIGH QUALITY
INDUSTRIAL GRADE MOUNT THAT HAS A POSITIVE STOP WHEN YOU BOLT THEM UP
UNLIKE MANY OF OUR COMPETITORS THAT USE A FORD FLATHEAD KNOCKOFF
MOUNT WITH NO POSITIVE STOP OR IN SOME CASES THE RUBBER DISINTEGRATES
WITHIN JUST A FEW MONTHS OF INSTALLATION. THAT WILL NOT HAPPEN WITH OURS.

SOLD AS A COMPLETE SET WITH RUBBER MOUNTS, HARDWARE & INSTRUCTIONS.

FOR ANY OTHER APPLICATION, PLEASE SEE OUR UNIVERSAL KIT, PART 10075.

 

Additional information

Weight 11 lbs
Dimensions 11 x 8.5 x 5.5 in