10060 AIR CONDITIONING POWER STEERING & ALTERNATOR 153 194 215 230 250 USING INTEGRATED OR NON-INTEGRATED HEAD

$325.00

AIR CONDITIONING POWER STEERING & ALTERNATOR BRACKETS FOR 153 194 215 230 250 ENGINES USING INTEGRATED OR NON-INTEGRATED CYLINDER HEAD. ADJUSTABLE FRONT TO BACK. PLAIN STEEL READY TO PAINT.

5 in stock

Category:

Description

Item specifics

Condition: New Other Part Number: 10060
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10060
UPC: Does not apply

A/C, ALTERNATOR & POWER STEERING BRACKET FROM DAVIS SPEED EQUIPMENT TO INSTALL A SAGINAW TYPE 1 PUMP,
10SI CASED ALTERNATOR & SANDEN 508 COMPRESSOR ONTO A 1975-84 250 USING AN INTEGRATED CYLINDER HEAD.
WILL ALSO WORK ON ANY 153 194 215 230 OR 250 THAT IS USING A NON-INTEGRATED HEAD.
WORKS WITH BOTH IRON AND ALUMINUM THERMOSTAT HOUSINGS.

BRACKETS ARE TIG WELDED PLAIN STEEL AND COME WITH HARDWARE & INSTRUCTIONS. THEY ARE IN
“READY TO PAINT” CONDITION. JUST WIPE DOWN WITH SOLVENT AND PAINT.

INCLUDES BRACKETS, HARDWARE & INSTRUCTIONS.

REQUIREMENTS FOR USE:

1) 153 194 215 230 250 OR 292 ENGINE.
2) SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES.
3) SANDEN 508 (SD5) TYPE A/C COMPRESSOR. OTHERS MAY WORK. COMPARE CASE DIMENSIONS.
4) 10SI CASED ALTERNATOR
5) 2 GROOVE POWER STEERING & WATER PUMP PULLEYS, AND A 2 GROOVE BALANCER.

WHAT THIS IS NOT FOR:

1) 292 ENGINES USING 1964-74 292 WATER PUMP. PLEASE SEE 10009 INSTEAD.
2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, THEN THIS WILL BE TOO WIDE. CONSIDER CHANGING TO
    NON-INTEGRATED HEAD AND USING 10037 INSTEAD.
3) 3X1 INTAKE.

NOTES OF INTEREST:

MOVES THERMOSTAT HOUSING OUT FROM HEAD 3/8″.

IF USING COIL IN CAP HEI, THEN YOU WILL WANT TO USE THE SMALLER 5-1/2″ DIA. WATER PUMP PULLEY, NOT THE 7″ DIA.

CAN BE ADJUSTED FRONT TO BACK TO ALLOW FOR DIFFERENT PULLEY ARRANGEMENTS.

CAN BE USED ON A 292 ONLY IF IT HAS BEEN CHANGED OVER TO A 250 WATER PUMP AND THERMOSTAT HOUSING OR
IF USING A 1975-77 OR 1978-89 292 WATER PUMP.

LOOK AT DIMENSIONAL DRAWING. IF YOU WANT TO HAVE THE ALTERNATOR SIT LOWER, THEN 10010 COULD BE USED INSTEAD.

10060 DOES NOT INCLUDE COMPRESSOR, ALTERNATOR, PUMP, PULLEYS OR BELTS.

WORKS WITH STOCK & AFTERMARKET EXHAUST MANIFOLDS & HEADERS.

WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.

IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND INTEND TO ALSO USE AC, THEN
PLEASE SEE 10060.

PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6 CYL PUMP WORKS WELL FOR REFERENCE. SHAPE OF RESERVOIR
ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

All designs are the property of Davis Speed Equipment, LLC

Additional information

Weight 15 lbs
Dimensions 12 x 12 x 9 in