10006 POWER STEERING & ALTERNATOR BRACKET 292 WITH 1963-74 WATER PUMP

$160.00

POWER STEERING & ALTERNATOR BRACKET FOR 292 USING THE 1963-74 WATER PUMPS. WORKS WITH NON-INTEGRAL HEADS. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS.

2 in stock

Category:

Description

Item specifics

Condition: New Other Part Number: 10006
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10006
UPC: Does not apply

NEW POWER STEERING & ALTERNATOR COMBO BRACKET SET FOR THE 1963-74 292
USING A SAGINAW PUMP AND 10SI DELCO ALTERNATOR.

BRACKETS ARE PLAIN STEEL AND ARE “READY TO PAINT”. JUST WIPE DOWN WITH SOLVENT AND PAINT.

BRACKETS COME WITH HARDWARE & INSTRUCTIONS. DOES NOT INCLUDE PUMP, ALTERNATOR, BELTS OR PULLEYS.

REQUIREMENTS:

1) 292 USING THE 1963-64 OR 1965-74 STYLE WATER PUMP.
2) GM SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES BELOW.
3) GM 10SI CASED ALTERNATOR.
4) NON-INTEGRAL CYLINDER HEAD.
5) 2 GROOVE POWER STEERING PUMP PULLEY.

WHAT THIS DOES NOT WORK WITH:

1) NOT FOR USE WITH INTEGRAL CYLINDER HEADS.
2) NOT FOR USE WITH TRIPOWER.
3) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, CHECK DIMENSIONAL DRAWING FOR CLEARANCES.
YOU MAY FIND 10021 WILL FIT BETTER.

NOTES OF INTEREST: 

1) WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.
2) IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER, THEN YOU CAN ALSO RUN AIR CONDITIONING. WE HAVE THREE OPTIONS FOR A/C.
3) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

Design is the property of Davis Speed Equipment, LLC

Additional information

Weight 9 lbs
Dimensions 11 × 8.5 × 5.5 in

You may also like…