10010 AIR CONDITIONING POWER STEERING & ALTERNATOR BRACKET 292 USING 1975-89 WATER PUMP

$325.00

AIR CONDITIONING POWER STEERING & ALTERNATOR BRACKET FOR 292 USING 1975-89 WATER PUMPS. WORKS WITH INTEGRAL & NON-INTEGRAL HEADS. ADJUSTABLE FRONT TO BACK. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS.

4 in stock

Category:

Description

Item specifics

Condition: New Other Part Number: 10010
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10010
UPC: Does not apply

NEW AIR CONDITIONING, POWER STEERING & ALTERNATOR COMBO BRACKET SET FOR THE 1975-89 292
USING A SAGINAW PUMP, 10SI DELCO ALTERNATOR & A SANDEN 508 (SD5) STYLE AC COMPRESSOR.

PLENTY OF ADJUSTMENT FRONT TO BACK TO ACCOUNT FOR DIFFERENT BELTING AND PULLEY DEPTHS.

BRACKETS ARE TIG WELDED PLAIN STEEL AND ARE “READY TO PAINT”. JUST WIPE DOWN
WITH SOLVENT AND PAINT.

BRACKETS COME WITH HARDWARE & INSTRUCTIONS. DOES NOT INCLUDE PUMP, COMPRESSOR, ALTERNATOR, BELTS OR PULLEYS.

REQUIREMENTS:

1) 292 ENGINE USING A 1975-77 OR 1978-89 STYLE WATER PUMP.
2) GM SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES.
3) GM 10SI CASED ALTERNATOR.
4) 2 GROOVE POWER STEERING PUMP PULLEY.
5) TYPICAL SANDEN 508 STYLE AC COMPRESSOR.
6) AT LEAST 2 GROOVES ON THE WATER PUMP PULLEY & BALANCER.

WHAT THIS DOES NOT WORK WITH:

1) NOT FOR 292 ENGINES USING 1963-74 STYLE WATER PUMPS. SEE 10009 INSTEAD.
2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
    OR A 1948 OR OLDER CAR, THEN THIS WILL BE TOO WIDE. PLEASE SEE 10039 INSTEAD.

NOTES OF INTEREST: 

1) CAN BE USED ON A 292 THAT IS USING A WATER PUMP & THERMOSTAT HOUSING FROM A 250.
2) COULD BE USED ON A 153 194 215 230 OR 250.
2) WORKS WITH ALL STOCK & AFTERMARKET EXHAUST MANIFOLDS AND HEADERS.
3) WORKS WITH ALL INTAKES.
4) WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.
5) PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6 CYL PUMP WORKS WELL FOR REFERENCE.
SHAPE OF RESERVOIR ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.
6) AC WILL CLEAR ALL POINT, INTERNAL & EXTERNAL COIL HEI DISTRIBUTORS.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

Design is the property of Davis Speed Equipment, LLC

Additional information

Weight 18 lbs
Dimensions 12 x 12 x 9 in