10047 SIDE MOTOR MOUNTS FOR 1952-54 or 1958-62 235 OR 261 INTO 1949-54 CHEVY CAR

$125.00

SIDE MOTOR MOUNTS FOR INSTALLING A 1952-54 OR 1958-62 VINTAGE CHEVY 235/261 ENGINE INTO A 1949-54 CHEVY CAR.

1 in stock (can be backordered)

Description

Item specifics

Condition: New Manufacturer Part Number: 10047
Surface Finish: PLAIN STEEL Part Brand: Davis Speed Equipment
Warranty: Yes Country of Manufacture: United States
Country/Region of Manufacture: United States

THESE MOUNTS ARE INTENDED FOR MOUNTING A 1952-54 (and 1955 1st series truck) or 1958-62 VINTAGE 235 OR 261 (WHICH HAVE 3 BOLT SIDE MOUNTS)
INTO A 1949-54 CHEVY CAR. MAY WORK IN OTHER APPLICATIONS AS WELL. SEE DIMENSIONAL DRAWING TO DETERMINE
IF THESE WILL WORK FOR YOU. BASICALLY, IF YOU HAVE A 4 SIDED FRAME RAIL, A 22″-24″ INSIDE FRAME DIMENSION,
AND THE OIL PAN RAIL IS APPROXIMATELY LEVEL WITH THE TOP OF THE FRAME RAIL, ¬†GIVE OR TAKE 1/4″, THEN THESE
SHOULD WORK FOR YOU.

FOR 1937-48 CARS, SEE PART 10083.

FOR ANY OTHER APPLICATION, PLEASE SEE OUR UNIVERSAL KIT, PART 10074.

NOTE: 1952-54 BLOCKS HAVE A 3 BOLT SIDE MOUNT THAT IS DIFFERENT THAN THE 1958-62 BLOCKS. THESE MOUNTS HAVE BEEN DESIGNED WITH A DUAL PATTERN SO THEY WILL WORK WITH BOTH APPLICATIONS.

CLEARS STOCK STEERING ON A 1949-54 CAR.
CLEARS STOCK EMERGENCY BRAKE.
WORKS WITH STOCK GENERATOR.
CLEARS SANDEN 508 A/C COMPRESSOR.
WORKS WITH FENTON HEADERS.
AND YES, IT INCLUDES THE RUBBER MOUNT…

REQUIRES WELDING OF FRAME BRACKET TO CAR FRAME.

AS WITH ALL OUT MOTOR MOUNTS, OUR RUBBER MOUNTS ARE A HIGH QUALITY
INDUSTRIAL GRADE MOUNT THAT HAS A POSITIVE STOP WHEN YOU BOLT THEM UP
UNLIKE MANY OF OUR COMPETITORS THAT USE A FORD FLATHEAD KNOCKOFF
MOUNT WITH NO POSITIVE STOP OR IN SOME CASES THE RUBBER DISINTEGRATES
WITHIN JUST A FEW MONTHS OF INSTALLATION. THAT WILL NOT HAPPEN WITH OURS.

SOLD AS A COMPLETE SET WITH RUBBER MOUNTS, HARDWARE & INSTRUCTIONS

 

Additional information

Weight 8 lbs
Dimensions 11 × 8.5 × 5.5 in

You may also like…