10058 POWER STEERING BRACKET 194 215 230 250 CHEVY USING INTEGRATED OR NON-INTEGRATED HEAD

$143.00

POWER STEERING BRACKET FOR 1962-89 194 215 230 & 250 ENGINES WITH INTEGRAL OR NON-INTEGRAL HEAD. ADJUSTABLE FRONT TO BACK. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS.

2 in stock (can be backordered)

Category:

Description

Item specifics

Condition: New Other Part Number: 10058
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10058
UPC: Does not apply

POWER STEERING BRACKET FROM DAVIS SPEED EQUIPMENT TO INSTALL A SAGINAW TYPE 1 PUMP ONTO
A 1975-84 250 USING AN INTEGRATED CYLINDER HEAD. WILL ALSO WORK ON ANY 153 194 230 OR 250 THAT
IS USING A NON-INTEGRATED HEAD. WORKS WITH BOTH IRON AND ALUMINUM FACTORY THERMOSTAT HOUSINGS.

BRACKETS ARE PLAIN STEEL AND COME WITH HARDWARE & INSTRUCTIONS. THEY ARE IN
“READY TO PAINT” CONDITION. JUST WIPE DOWN WITH SOLVENT AND PAINT.

REQUIREMENTS FOR USE:

1) 153 194 215 230 or 250 ENGINE.
2) SAGINAW POWER STEERING PUMP. SEE NOTES.
3) APPROPRIATE UPPER ALTERNATOR BRACKET (SEE PICS).
5) 2 GROOVE BALANCER & WATER PUMP PULLEY. (SEE NOTES BELOW).

WHAT THIS IS NOT FOR:

1) 292 ENGINES. PLEASE SEE 10003 or 10004 INSTEAD.
2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, THEN THIS MIGHT BE TOO WIDE. SEE DIMENSIONAL DRAWING.
CONSIDER CHANGING TO
 NON-INTEGRATED HEAD AND USING 10021 INSTEAD.
4) TRYING TO RUN BOTH PS & ALT ON SAME SINGLE BELT. NOT ENOUGH BELT WRAP ON ALT. (SEE NOTES BELOW).

NOTES OF INTEREST:

PUMP CAN BE ADJUSTED FRONT TO BACK TO ALLOW FOR DIFFERENT PULLEY ARRANGEMENTS.

CAN BE USED ON A 292 IF IT HAS BEEN CHANGED OVER TO A 250 WATER PUMP AND THERMOSTAT HOUSING OR
IF USING A 1975-77 OR 1978-89 292 WATER PUMP.

10058 DOES NOT INCLUDE PUMP, PULLEYS OR BELTS.

WORKS WITH STOCK & AFTERMARKET EXHAUST MANIFOLDS & HEADERS.

WORKS WITH ALL WATER PUMP PULLEY SIZES.

IF YOU DO NOT HAVE A 2 GROOVE BALANCER OR WATER PUMP PULLEY AND DO NOT INTEND
TO CHANGE TO 2 GROOVES, THEN PLEASE SEE PART 10005 OR 10089 INSTEAD.

IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND INTEND TO ALSO USE AC, THEN
PLEASE SEE 10005 OR 10089 INSTEAD. NEED THE AC BRACKET AS WELL? THEN SEE 10090 OR 10091.

TRYING TO RUN THIS AND YOUR ALTERNATOR OFF ONE BELT DOES NOT USUALLY WORK
BECAUSE YOU WON’T HAVE ENOUGH WRAP ON THE ALTERNATOR PULLEY. USE SEPARATE
BELTS AS SHOWN IN PICTURES.

WILL NOT WORK WITH THE LARGE UGLY UPPER ALTERNATOR BRACKET THAT BOLTS
TO THE HEAD. YOU NEED TO USE THE EARLIER “STRAP” TYPE, OR BUY ONE OF OUR
ALTERNATOR BRACKETS, PART 10000 OR 10022 OR 10094.

PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6 CYL PUMP WORKS WELL FOR REFERENCE. SHAPE OF RESERVOIR
ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

All designs are the property of Davis Speed Equipment, LLC

Additional information

Weight 5 lbs
Dimensions 11 × 8.5 × 5.5 in

You may also like…