10059 POWER STEERING & ALTERNATOR BRACKET 153 194 215 230 250 USING INTEGRATED OR NON-INTEGRATED HEAD

$160.00

POWER STEERING & ALTERNATOR BRACKET FOR 153 194 215 230 250 ENGINES. WORKS WITH INTEGRAL OR NON-INTEGRAL HEADS. ADJUSTABLE FRONT TO BACK. PLAIN STEEL READY TO PAINT. COMES WITH HARDWARE & INSTRUCTIONS.

5 in stock (can be backordered)

Category:

Description

Item specifics

Condition: New Other Part Number: 10059
Brand: DAVIS SPEED EQUIPMENT Part Brand: DAVIS SPEED EQUIPMENT
Warranty: Yes Surface Finish: PLAIN STEEL
Country/Region of Manufacture: United States Manufacturer Part Number: 10059
UPC: Does not apply

ALTERNATOR & POWER STEERING BRACKET FROM DAVIS SPEED EQUIPMENT TO INSTALL A SAGINAW TYPE 1 PUMP
AND GM ALTERNATOR ONTO A 1975-84 250 USING AN INTEGRATED CYLINDER HEAD. WILL ALSO WORK
ON ANY 153 194 215 230 OR 250 THAT IS USING A NON-INTEGRATED HEAD.

WORKS WITH BOTH IRON AND ALUMINUM THERMOSTAT HOUSINGS.

BRACKETS ARE TIG WELDED PLAIN STEEL AND COME WITH HARDWARE & INSTRUCTIONS. THEY ARE IN
“READY TO PAINT” CONDITION. JUST WIPE DOWN WITH SOLVENT AND PAINT.

INCLUDES BRACKETS, HARDWARE & INSTRUCTIONS.

REQUIREMENTS FOR USE:
1) 153 194 215 230 OR 250 ENGINE.
2) SAGINAW TYPE 1 POWER STEERING PUMP. SEE NOTES.
3) GM ALTERNATOR
4) 2 GROOVE POWER STEERING PULLEY.

WHAT THIS IS NOT FOR:
1) 292 ENGINES USING 1964-74 292 WATER PUMP. PLEASE SEE 10006 INSTEAD.
2) IF YOU ARE USING ONE OF THESE ENGINES IN A 1955 1ST SERIES OR OLDER TRUCK
OR A 1948 OR OLDER CAR, THEN THIS WILL BE TOO WIDE. CONSIDER CHANGING TO
    NON-INTEGRATED HEAD AND USING 10021 INSTEAD.
3) 3X1 INTAKE.

NOTES OF INTEREST:

CAN BE ADJUSTED FRONT TO BACK TO ALLOW FOR DIFFERENT PULLEY ARRANGEMENTS.

CAN BE USED ON A 292 ONLY IF IT HAS BEEN CHANGED OVER TO A 250 WATER PUMP AND THERMOSTAT HOUSING OR
IF USING A 1975-77 OR 1978-89 292 WATER PUMP AND NOT USING THE BYPASS HOSE.

10059 DOES NOT INCLUDE ALTERNATOR, PUMP, PULLEYS OR BELTS.

WORKS WITH BOTH 5-1/2″ & 7″ WATER PUMP PULLEY SIZES.

IF YOU HAVE 2 GROOVES ON WATER PUMP AND BALANCER AND INTEND TO ALSO USE AC, THEN
PLEASE SEE 10060.

PS PUMP NEEDS A STUD NEXT TO THE PRESSURE HOSE CONNECTION AS SHOWN. DO NOT USE A STUD AT ANY OTHER LOCATION.
KEYED SHAFT PUMPS ARE RECOMMENDED. 1969 TRUCK 6 CYL PUMP WORKS WELL FOR REFERENCE. SHAPE OF RESERVOIR
ISN’T RELEVANT. BOTH “MILK JUG” AND “A-FRAME” STYLES WORK FINE.

ALL DAVIS SPEED EQUIPMENT PARTS ARE MADE IN THE USA.

All designs are the property of Davis Speed Equipment, LLC

Additional information

Weight 10 lbs
Dimensions 11 × 8.5 × 5.5 in